Difficulty:
Beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

 For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. Failure to do so will result in the design being not same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.  Glue gun and  ribbons - two pieces - width 0.78 inches and length 11.81 inches.

Size hoop:
5x7 hoop
6x10 hoop
8x12 hoop

Size and stitches in the hoop:
5x7 hoop : 5x6.91 inches / 27657 stitches
6x10 hoop : 6x9.89 inches / 38322 stitches
8x10 hoop : 7.20x11.22 inches / 42437 stitches

Complete sizes:
5x7 hoop : 8.25x1.76 inches
6x10 hoop : 11.32x1.95 inches
8x10 hoop : 13.02x2.29 inches

The zip folder contains :
Formats: PES, DST, EXP, HUS, JEF, CSD, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you