Difficulty:
Beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. I use a reinforced - firm felt 1 mm and a weight of 190gr./m2 I recommend using a felt of 1 to 1.2 mm (0.0394 inch or 0.0472 inch).Glue gun, LED tea light candle.

Size hoop: 5x7 hoop

Size and stitches in the hoop - Elf door for tea light LED candle:
bottom : 4.96x6.80 inches/53026 stitches - embroider 1 piece
...please check the number of stitches your machine can embroider with a 5x7 hoop - if it is not able to embroider this number of stitches, you must use a larger hoop.
candy 1 : 0.84x1.78 inches/2537 stitches - embroider 2 pieces
candy 2 : 0.96x0.97 inches/1794 stitches - embroider 2 pieces
elf door 1 : 4.45x3.28 inches/24222 stitches - embroider 1 pieces
or elf door 2 : 3.04x4.43 inches/25102 stitches - embroider 1 pieces
fence : 1.08x4.89 inches/12014 stitches - embroider 1 pieces

Size and stitches in the hoop - hanging decoration:
elf door 1 : 3.28x4.77 inches/24442 stitches
elf door 2 : 3.04x4.75 inches/25418 stitches

The zip folder contains :
Formats: PES, DST, EXP, HUS, JEF, VIP, XXX, VP3, EMB
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace and felt PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you