Difficulty: Beginner

This is a machine embroidery design not a patch. You need to transfer the files to your embroidery machine to use it.

For these types of designs it is very important to use the same color for the bobbin thread as the top thread - i.e. if you embroider the red thread - it is also necessary to use the red bobbin thread. If you do not do this, the design will not be the same on both sides.

The designs should be embroidered with water soluble stabilizer. We use Vilene water soluble stabilizer-If it’s too thin use two layers. Use a size 11 or 75/11 sharp sewing needle and 40 weight rayon or polyester thread. For my designs, I mostly use embroidery threads from Gunold - SU rayon (sulky rayon), Isacord or Brother embroidery threads.Fabric - I used a 100% canvas - cotton. Ribbon with a length of 20 inches.

Size hoop : These are the hoops I used - it is necessary to use the size of the hoop to depend on the size of the design.

Mini bib : 5x7 hoop
Small bib : 6x10 hoop
Middle bib : 8x8 hoop
Large bib : 7x12 hoop
Jumbo bib : 8x12 hoop

Size and stitches :
Mini bib : 5x5.65 inches/ 18466 stitches
Small bib : 5.97x6.72 inches / 21285 stitches
Middle bib : 6.87x7.75 inches / 23971 stitches
Large bib : 6.97x7.85 inches / 24258 stitches
Jumbo bib : 7.71x8.69 inches / 26405 stitches

The zip folder contains :
Formats: PES, CSD, DST, EXP, HUS, JEF, SHV, VIP, XXX, VP3
Color chart PDF
Copyright PDF
Photo instructions how to embroider lace+fabric PDF
Instructions for design PDF

Resizing or editing of the designs is not recommended and we can not guarantee the quality of the designs if you alter them in any way.

Thank you